125-S Spin-On Filter
Description
Removes contaminants as low as 1-micron
Removes water and particles
Does not remove or deplete additives
Used For
Hydraulic Oil
Engine Oil
Transmission Oil
Diesel Fuel
Capacity & Flow Rate
Requires 2 Qt./1.9 L. of makeup fluid (housing volume)
*Ideal sump size range from 0-60 Gal./0-227.1 L.
*Flow rate range from 0-.75 GPM/0-2.8 LPM
Specifications
Beta3 =250
Max operating pressure 80 PSI
Overall dimensions 10.5” (H), 4.375” (D)
Fits 900013 size spin-on plate part # 2579
Used with petroleum or synthetic fluids & diesel fuel
Notes
*Flow rates are established using oils at the standard 40° C/104° F and are subject to vary
*Viscosity, operating temperature, and generated contamination will affect sizing and flow rates of filtration equipment
Most applications, spin-on filters need to be changed at 500 hours for optimal performance, ideally change the element when the flow is half the starting flow or the PSI is double the starting PSI
The max particles & water capacities are determined when the flow is reduced by half the original flow. (this is the optimal operating condition)
Recommended Viscosities
Diesel
ISO: 10, 15, 22, 32, 46, 68, 100
SAE: 0W, 5W, 10W, 15W, 20
