1002 - Bypass Filter/Element | Royac

Usually ships in 2 to 3 days
10.00 LBS
Free Shipping
Fluid Type:
Lube, Hydraulic, Diesel
Service Sump Size:
16-250 Gallons
Oil Viscosity:
Diesel, 10, 15, 22, 32
Oil Weight:
Make-Up Oil Required (Quarts):
Adding to cart… The item has been added

Harvard Depth Filter Element 1002

Efficient Contaminant Removal, Exceptional Performance, used in bypass and portable filtrer system.

The Harvard Depth Filter Element 1002 is a state-of-the-art filtration solution designed to eliminate contaminants as small as 1 micron, ensuring the purity of your fluids. Ideal for a range of applications, this filter effectively removes water and particles without depleting additives. Whether used for hydraulic oil, engine oil, transmission oil, cutting oil, or other low viscosity oil-based lubricants, this filter delivers unparalleled performance.

Key Features:

Micron-Level Contaminant Removal:

The Harvard Depth Filter Element 1002 excels at removing contaminants as low as 1 micron, providing a comprehensive solution for maintaining the cleanliness of your fluids.

Preservation of Additives:

Unlike some filters, our depth filter does not remove or deplete additives, ensuring that the essential components of your fluids remain intact.

Versatile Applications:

Suitable for a range of fluids, including hydraulic oil, engine oil, transmission oil, cutting oil, and other low viscosity oil-based lubricants. Additionally, it is compatible with diesel fuel.

Recommended Viscosities:

Diesel: ISO 10, 15, 22, 32; SAE 5W, 10W

Capacity & Flow Rate:

Requires 20 Qt./18.9 L. of makeup fluid (housing volume)

Ideal sump range from 16-250 Gal./60.6-946.4 L.

Lube: 16-22 Gal./60.6-83.3 L.

Hydraulic: 151-250 Gal./571.6-946.4 L.

Flow rate: Refer to the provided chart


Beta3 = 250

Max operating pressure: 80 PSI

Overall dimensions: 19.75” (H), 7.5” (D)

Compatible with part numbers: 900102, 900101, 900358, 900372, 900243, 900865, 900320, 900188, 900186, 900245, 900265, 900267, 900269, 900281, 900280, 900368, 900033, 900035

Designed for use with petroleum or synthetic fluids & diesel fuel


Flow rates are determined using ISO 10-32 viscosity oils at the standard 40° C/104° F and are subject to variation.

Viscosity, operating temperature, and generated contamination will impact the sizing and flow rates of filtration equipment.

For optimal performance, elements should be changed between 500-1000 hours in most applications. Ideally, change the element when the flow is half the starting flow or the PSI is double the starting PSI.

Max dirt & water capacities are determined when the flow is reduced by half the original flow, representing the optimal operating condition.

Upgrade your filtration system with the Harvard Depth Filter Element 1002 – where efficiency meets reliability for uninterrupted fluid purity.