TTHH626-36 Stainles Steel Filter Housing 36 Inches Hight - 2" NPT / 2" & 3" Flange inlet - outlet Ports.
TTI’s PowerGuardTM TTHH626 housing line offers a standard 304 stainless steel construction.
Features include a double knife edge seal on both the hold down plate and the bottom housing
cup to mitigate bypass. The hinge block located on the lid, is a safe and effective component to
remove and replace filter elements. There are 2 ports on both the inlet and outlet of the housing, to
accommodate differential and sampling gauges.
■ Height: 46
■ Inlet/Outlet Port: 2" FNPT / 2" & 3" FLANGE
■ Width: 15"
■ 150 PSI working pressure
■ 304 stainless steel
■ Hinge block for ergonomic filter changeouts
■ Double knife edge seal
Top Applications Top Industries
• Power Generation • Gas Turbines – Turbine Oil
• Pulp & Paper • Oil Purification Systems
• Steel Mills • Vacuum Dehydrators
• Mining • Diesel Fuel Purification Systems
DUAL PHASE MICROGLASS: FILTER MEDIA SELECTION GUIDE
The filter media is the most critical component through which particulate retention is accomplished. For the
multitudes of fluids and applications, TTI has developed and offers a range of filtration media. This allows
elements to be manufactured in a broad range of filtration capabilities to suit these applications.
TTI depth filters consist of Dual Phase media for the treatment of oils, lubricants, flame retardant liquids, fuels,
and synthetic liquids. Our Dual Phase microglass is available in ratings of 1μm, 3μm, 6μm,10μm, and 25μm, with high dirt-holding capacity and low pressure drop.